Table Of Contents

Introduction

Testing for quality assurance (QA) is a fundamental and essential component of software development. Not only is it necessary to ensure that all the critical elements of software projects are in place to be delivered on schedule, but it also contributes to raising the project’s overall quality. This reasons why QA candidates need to have a strong understanding of various concepts and be able to answer tricky questions. Imagine being asked tough QA interview questions. Testing your skills on such QA interview questions and getting zero marks can be pretty hard. Don’t worry. Although it is not as bad as it sounds, you will still have to face a few tricky QA testing interview questions that won’t be easy to answer. To help you in this matter, we have listed below a list of 30 tricky QA interview questions that will be enough for you to prepare for any job interview in the coming year or perhaps even later!

QQA Interview Questions For Freshers

Get the top QA Interview Questions for beginners here below.

1. What is Quality Assurance?

Quality assurance aims to ensure that the generated software complies with all the requirements and specifications in the SRS document.

2. How is Quality Assurance different from Software testing?

Quality Assurance confirms that the developed software complies with all specifications, including SRS, FRS, and BRS. It is a deliberate testing process evaluation method to increase the production of high-quality goods. QA develops strategies to avert potential bugs during the software development process. It focuses mainly on management-related topics, such as project analysis, checklists, and development processes and techniques.

Software testing is a method of investigating a system to see how it functions and look for potential flaws. The product is tested using various techniques to identify bugs and determine if they have been removed.

3. Define the purpose of QA in Software Development.

QA’s Roles And Responsibilities:

Defining test objectives and the strategy for achieving them.
Developing a test strategy based on the specifications and timelines of the project.
Executing tests using the appropriate methods (manually or with test execution tools) and recording test failures.
Determining the root cause by analyzing the flaws.
Repairing flaws, so they don’t compromise the quality of the final output.
Reporting software flaws to developers using a bug tracking system (e.g., Bugzilla, Mantis, QA Touch). Early testing to remove deficiencies at an early stage lowers the cost and duration of bug fixes.

4. What is the lifecycle of a Quality Assurance Process?

QA follows a PDCA lifecycle:

i. Plan

The organization specifies the procedures needed to create a software product of the highest caliber during the planning phase of the Quality Assurance process.

ii. Do

Do is a stage in which the procedures are developed and tested.

iii. Check

This stage is intended to monitor the operations and determine whether they adhere to the users’ needs.

iv. Act

The Act is a step in putting the necessary procedures into action.

5. Differentiate between Test Plan and Test Strategy.

Test Plan	Test Strategy
A test plan for software projects is a document that outlines the goal, strategy, approach, and emphasis of a software testing effort.	A test strategy is a set of rules that specifies test design and how testing must be carried out.
A testing manager or lead executes a test plan that specifies how, when, and what to test.	The project manager implements a test strategy. It explains the kind of methodology to use and the module to test.
The test plan describes the specification.	Test strategy describes the general methods.
The test plan may alter.	There is no way to adjust the test strategy.
The Test approach is a long-term action plan.	Test planning aims to detect risks by identifying potential problems and dependencies. Non-project-specific information can be abstracted and applied to test strategy.
Test plan can be an individual plan.	The test strategy element of a test plan is frequently encountered in smaller projects.

6. Explain What is Build and Release. Differentiate Between Them.

Build:

The development team provides the test team with a “build.”
The test team may reject it if any tests fail or a “build” does not satisfy the requirements.
Multiple builds comprehend to a single release.

Release:

A product’s official release to customers is called a “release.”
Customers receive a build when it has been “released” after being tested and approved by the test team.

7. What Do You Understand About Bug Leakage and Bug Release?

Bug leakage:

A bug leak occurs when the bug is missed in previous builds or versions of the application.
A bug leakage is a fault that happens while testing but is discovered later by the tester or end-user.

Bug release:

A bug release occurs when a specific software version is released with several known bugs or defects. Usually, the Release Notes make mention of these bugs. These bugs are frequently of low priority and low severity.
When the business can afford it, it is decided to leave the bug in the deployed software rather than spend time and money correcting it in that specific version.

8. What Do You Mean by Monkey Testing?

In software development, The effectiveness of an application is tested through monkey testing. “Monkey testing” involves a tester randomly inputting data into the program with no intention of crashing it. By supplying arbitrary inputs and attempting to break the program, it is appropriate for load testing.

Some flaws might not always be discovered using conventional methods at regular intervals. These problems are more likely to be found if random inputs are provided. This method is used to uncover bugs not typically encountered by conventional methods and is applied to the entire system.

9. What Do You Mean by Gorilla Testing?

Gorilla testing meticulously tests every last bit of code until it fails using arbitrary inputs, whereas the resilience of an application is tested rigorously by hand.

The main difference between Gorilla and Monkey testing is that the former tests specific modules, whereas the latter evaluates the entire system. Random valid and invalid inputs are supplied into each product’s modules until a module crashes.

This phase is carried out for each module in the last phases of the software development cycle to test the robustness of the application. It is also known as “torture testing” or “fault tolerance testing” because it is rigorous.

10. Explain Testware.

Testware refers to the artifacts created during the testing process needed to plan, design, and carry out tests.

Documentation, scripts, inputs, anticipated outcomes, setup and teardown methods, files, databases, environments, and other software or utilities needed in testing are considered testware.

Testware is considered a testing tool that is adequately saved and controlled by a configuration management tool.

Testware differs from regular software in two ways:

It is created by testers for a specific objective.
It has multiple users and various quality measures.

11. What is a traceability matrix?

The Traceability matrix is a specific kind of document used in software development projects to track, identify, and confirm the development of a particular capability or component. Aids in connecting and tracing business, application, security, and other requirements to their execution, testing, or completion. It assesses and compares various system components and gives information on the state of the project’s needs in terms of their degree of completion.

A worksheet-style document with a table typically serves as a traceability matrix. An identifier for one group is placed in the top row, and an identification for the other set is placed in the left column to compare the two sets of values. A mark is made if there is a similarity or a connection.

12. Distinguish Between Verification and Validation.

Verification	Validation
The Verification involves verifying documentation, designs, codes, and programs.	The validation process involves testing and validating the actual product.
Verification does not involve code execution.	Validation involves code execution
Verification uses techniques like reviews, walkthroughs, inspections, and desk-checking.	Validation employs black box testing, white box testing, and non-functional testing.
Verification examines whether the software confirms a specification.	Validation examines whether the program satisfies the needs and expectations.
Verification discovers the bugs early in the development cycle.	Validation finds the issues that verification is unable to catch.
Verification targets software architecture, design, and databases.	Validation focuses on the actual software product
The QA team conducts verification	The QA team does validation independently of testing teams
Verification occurs first	Validation is performed after verification

13. Distinguish Between Retesting and Regression Testing?

Retesting:

Retesting is a technique to verify particular test cases discovered to have bugs in the final execution. Testers typically find these defects as they test a software program, then they are given to developers to remedy. The developers then fix the bugs and provide them back to the testers for validation. Retesting is the name of this ongoing procedure.

Regression testing:

Regression testing validates if a code update has negatively affected the application’s current features and functions.

Regression testing is conducted on passed test cases, whereas retesting is only performed on failed test cases.
While retesting verifies that the initial flaw has been fixed, regression testing looks for unanticipated side effects.
Unlike Regression testing, retesting includes defect verification.
Retesting is planned to test, whereas regression testing is called generic testing.
Automation makes it possible to perform regression testing but not retesting.

14. What is the Quality Audit?

In software testing, the audit compares a software product to predefined standards, and the desired standard is the primary goal of conducting an audit of a software testing phase.

Quality Audit determines if the process being utilized and implemented in the testing process is defined and specifications to ensure the generated product complies with them.

15. What Do You Know About the Defect Leakage Ratio?

Defect Leakage is a metric used to measure how well QA testing is done or how many problems get overlooked.

Formula to find the defect leakage ratio:

Defect Leakage = (No. of Defects Found in UAT / No. of Defects Found in QA Testing)

16. Describe the Different Forms of Software Quality Assurance Documentation.

i. Test policy: is a high-level document outlining the organization’s fundamental testing principles, methodologies, and critical testing objectives.

ii. Testing strategy: The testing strategy outlines the test levels (types) used for the project.

iii. Test plan: A test plan is an all-inclusive planning document (often formatted as a digital flipbook or interactive PDF) that includes information about the purpose, strategy, available tools, schedule, and other testing activities.

iv. Requirements Traceability Matrix: The requirements and test cases are related to this document.

v. Test scenario: A software system’s test scenario is a component or occurrence that one or more test cases could confirm.

vi. Test case: It is a collection of input values, expected postconditions for the execution, and results.

vii. Test Data: Test Data is information present before a test is run.

viii. Defect Report: A defect report is a written description of any error in a software system that prevents it from operating as intended.

ix. Test summary report: A high-level test summary report outlines the testing operations and test results.

17. Explain the Rule of a “Test Driven Development?“

The QA’s may write no production code until it is required to pass a failing unit test.
Compilation failures count as failures, and you are only permitted to write as much of a unit test as is necessary to fail.
The QA’s may write only the production code required to pass the one failed unit test.

18. What is a Cause-Effect Graph?

The cause-effect graph is an inclusion of a black box testing technique that identifies the fewest test cases that can adequately test the full scope of the product, Based on a set of criteria. It also highlights the connection between a particular result and the elements influencing the outcome.

The real benefit of cause-effect graph testing is the reduced test execution time and cost.

19. What is Thread Testing?

Thread testing is a type of software testing that examines the core functional capabilities of a given task (thread). It is one of the incremental techniques often done at the beginning of system integration testing.

QA Interview Questions For Experienced

20. What are the Five Dimensions of Risk?

The five dimensions of risk are as follows:

i. Schedule: Unrealistic timelines, such as building a large piece of software in a single day.

ii. Client: Unclear requirements, changing requirements, and ambiguous requirements descriptions.

iii. Human Resource: Lack of sufficient resources with the required expertise for the project.

iv. System assets: An unfavorable outcome will result from the inability to acquire all necessary resources, including hardware and software tools or licenses.

v. Quality: Product quality will be impacted by multiple factors, such as a lack of resources, a strict delivery timetable, and frequent modifications.

21. What Do You Understand About Regression Testing? Which Test Cases Should be Selected for this Process?

Regression testing is testing performed to ensure that a software update won’t impact how the product currently operates.

Practical regression tests may use the test cases listed below:

If features are apparent, users can see more of them.
Scenarios that examine the core properties of the product
Case studies of functionality that have undergone significant and recent changes
Every Integration Test Case
All Comprehensive Test Cases
Examples of boundary value tests
A variety of failure test case examples

22. Distinguish Between Severity and Priority.

Severity: The degree to which a specific flaw can affect the software is known as its severity. The parameter of “severity” describes how the defect affects the software’s functionality.

Priority: A characteristic that determines the sequence in which a defect should be addressed is called a priority. The first defect that needs to be corrected is the one with the highest importance.

Severity	Priority
A parameter that describes a software defect’s impact is called severity.	Priority is a parameter that determines the sequence to fix the problems.
The degree to which a flaw affects functionality is its severity.	Priority refers to how quickly a fault must be corrected.
The quality standard is related to severity.	Priority is related to how the issue will be scheduled for resolution.
The testing engineer determines the severity of the flaw.	The product manager sets the order of importance for defects.
Value is a measurement of severity.	The priority value is a matter of opinion.

23. What is the Difference Between Functional and Non-Functional Testing?

Functional Testing:

Functional testing validates each software function or feature.
Functional testing focuses on the client’s needs.
Functional testing aims to validate program actions.
Functional testing example would be to verify the login process.
Functional describes what the product performs, whereas Non-Functional describes how the product operates.
Functional testing is conducted before nonfunctional testing.

Non-Funtional Testing:

Non-functional testing validates nonfunctional elements, including performance, usability, and reliability.
Non-functional testing is challenging to execute manually.
non-functional testing is based on the customer’s expectations.
Non-functional testing confirms software performance.
Non-functional testing example would ascertain that the dashboard should load within two seconds.
Non-functional testing is performed after functional testing.

24. How Do You Decide When to Stop Testing?

Sometimes, as project managers or project leads, we may have to cancel testing to launch the product sooner. In those circumstances, we must determine whether the product has received sufficient testing from the testers.

When deciding when to halt testing in real-time projects, various considerations must be taken into account:

If the testing or release deadlines are met.
By entering the determined test case pass rate.
If the risk in the real-time project is below the permitted level.
If all the critical bugs and roadblocks have been resolved.
If the submission meets the requirements.

25. Differentiate Between Load Testing And Stress Testing.

The purpose of each is what makes a difference:

Through load testing, you can learn how a system responds to a predicted load.

Stress testing enables you to comprehend the maximum loads at which a system can function.

In other words, stress tests show you how a system might respond to heavy demand, such as a DDoS attack, the Slashdot effect, or different scenarios. In this manner, you might be ready for unforeseen occurrences.

On the other hand, load tests ensure you fulfill user expectations, such as service level agreement (SLA) obligations. So instead of breaking the application, the objective is to guarantee a satisfactory overall user experience. It enables you to deploy new code with assurance.

26. What is Ad-hoc Testing?

Adhoc testing is a causal method of software testing. It does not adhere to established procedures such as test plans, test cases, and requirement documentation.

Adhoc testing has the following traits:

It is done on an application after formal testing is finished.
Its primary goal is to malfunction the program without a predetermined procedure.
Adhoc testers should be well knowledgeable about the product they are testing.

27. How is Adhoc Testing Different From Monkey Testing and Exploratory Testing? State the Differences Among Them:

Adhoc and monkey testing both use an informal style. Although monkey testing does not require in-depth software understanding, Adhoc testing requires testers to have a thorough program knowledge.

The following is a list of the distinctions between exploratory testing and ad-hoc testing:

Adhoc testing is testing software without reference to requirements documents or specifications. Exploratory testing entails understanding the software and investigating the application.
In Adhoc testing, documentation is not necessary. In exploratory testing, documentation is required.
Adhoc testing’s primary goal is to refine the testing process. Learning about the application is the primary goal of exploratory testing.
Adhoc testing is a non-formal approach, while exploratory testing is a formal procedure.

28. What is a Bug Life Cycle?

i. New,

The status of a new defect, is set to New when it is initially logged and posted.

ii. Assigned

After the tester posts a bug, the tester’s lead reviews the bug and designates it for the developing team.

iii. Open

The developer gets to work on the defect fix and analysis.

iv. Fixed

A developer may mark an issue as fixed once the required code modifications have been made and verified.

v. Retest

The tester retests the code to see if the developer has fixed the issue. If not, then the status is changed to retest.

vi. Reopen

Once the developer has fixed the bug, but it still exists, the tester switches the status to Reopen, and the bug runs through the bug life cycle.

vii. Verified

After the developer has corrected the bug, the tester retests it; if no bugs are discovered, the status is changed to Verified.

viii. Closed

The status is changed to Closed if the bug is no longer present.

ix. Duplicate

The status is changed to Duplicate if the defect occurs twice or if it shares the same concept as the prior problem.

x. Rejected

The status is changed to Rejected if the developer believes the flaw is not there.

xi. Deferred

If the bug can be patched in the upcoming release and does not have a higher priority, the status becomes Deferred.

29. What Do You Understand About Bug/ Defect Triage in the Context of Quality Assurance?

Software testing generally employs Defect Triage, commonly referred to as Bug Triage. It is necessary to describe the faults’ importance and seriousness. The severity of a problem is determined by how it affects the application being tested.

Priority is the sequence in which a flaw must be corrected or resolved. Defect triage is essentially a method that aims to rebalance the process, which is typically problematic for the test team due to a lack of necessary resources. Defects are usually prioritized in defect triage based only on their severity, likelihood of recurrence, and risk.

30. What Do You Understand About Stubs and Drivers? Differentiate Between Them

The terms “stub” and “drivers” in software testing refer to a copy of the modules that replace new or absent modules.

Drivers are primarily used in bottom-up integration testing individually and created to improve the testing process. Stubs are used mainly in top-down integration testing.

The critical difference between them:

1. Stubs are used in top-down integration testing, while drivers are employed in bottom-up integration testing.

2. Stubs are an imitation of the called function in code. A section of code mimics a calling function’s behavior as a driver.

3. Stubs encourage the development of unfinished and missing modules. Drivers invoke test modules and pass test cases to other code.

4. Stubs are considered when lower-level modules are under the developing process, and high-level modules are tested. Drivers are considered when lower-level modules are tested, but higher-level ones haven’t yet been created.

31. What is the difference between a bug and a defect?

A software bug refers to any specific error within an application which causes it to malfunction, while defect covers any deviation from expected behavior such as bugs, missing features or performance issues.

32. Explain the concept of test coverage

Test coverage measures the extent to which software has been thoroughly tested, whether that be code coverage, functional coverage or requirement coverage

33. What is the difference between static testing and dynamic testing?

Static Testing: Static testing entails reviewing and analyzing software artifacts (code, design documents, etc.) without actually executing them; while Dynamic Testing involves running software to identify defects and assess its behavior.

34. What is a test oracle?

A test oracle is any mechanism used to assess whether a test has passed or failed; such as specifications, previous versions of software, human judgment or specifications themselves.

35. What is the difference between alpha testing and beta testing?

Alpha testing refers to software testing conducted within an organization by internal testers. Beta testing involves external users conducting real-world software testing in order to gain real-world feedback.

36. What is the difference between black-box testing and white-box testing?

Black-box testing: Evaluating software’s functionality without knowledge of its internal structure or logic. White-box testing: Examining this software’s internal structures and logic

37. What is the purpose of a test harness?

A test harness is a framework used to automate the testing process, including test case execution, result comparison, and report generation.

38. What is the difference between positive testing and negative testing?

positive testing is when software is run with valid input to check correct behavior while negative testing requires fake data.”

Negative testing: Simulating invalid input to ensure proper error handling.

39. What is the difference between unit testing and integration testing?

Unit testing involves verifying individual units of code to make sure they function as intended, while integration testing evaluates multiple parts together as one unit of code.

Integration testing: Testing how different parts of code interact together as expected.

40. What is the difference between functional testing and non-functional testing?

functional testing and non-functional testing? Functional testing: Assessing whether software meets its specifications against specified requirements.

Non-functional Testing: Evaluating non-functional attributes such as performance, usability and security.

41. What is the purpose of a test case?

A test case is a document which details an input, expected output, execution conditions for an examination procedure.

42. What is the difference between a test case and a test scenario?

Test case: A specific instance of a test scenario.
Test scenario: A high-level description of a test that covers a particular feature or functionality.

43. What is the purpose of a test summary report?

A test summary report provides an overall snapshot of testing activities, such as results, defects found and overall test status.

44. What is the purpose of a bug-tracking tool?

A bug-tracking tool is used to track, manage, and prioritize software defects.

45. What is the difference between a bug severity and bug priority?

Bug severity: The impact of a bug on the software’s functionality.
Bug priority: The urgency of fixing a bug, based on its impact on the business or user.

46. What is the purpose of a root cause analysis?

A root cause analysis is a technique for identifying the underlying causes of a problem and preventing future occurrences.

47. What is the difference between configuration management and defect tracking?

Configuration management: The process of identifying, controlling, and auditing changes to a software system.
Defect tracking: The process of tracking and managing software defects.

48. What is the difference between a sanity test and a smoke test?

Sanity test: A quick test to verify that the basic functionality of a software build is working.
Smoke test: A more comprehensive test to verify that the critical features of a software build are working.

49. What is the purpose of a test environment?

A test environment is a controlled environment used to execute tests, including hardware, software, and network configurations.

50. What is the difference between a build and a release?

Build: A specific version of the software that is produced by the development team.
Release: A specific version of the software that is delivered to the customer.

Conclusion

We hope this article on QA interview questions will help you get ready for your upcoming QA interview and give you a solid grasp of these QA interview questions ideas. You should consider your projects, your contribution, and the testing procedures used by your company.

For more such interview-related questions, subscribe to our blog.

Frequently Asked Questions

How Can I Prepare for QA Interview?

You can prepare for QA interview by going through QA interview questions and answers mentioned above. Research more about the company, get a gist of the culture they follow.

What are 5 QA Best Practices?

Create a detailed plan and specify QA goals and objectives.
undertake external quality checks and keep detailed documentation
Maintain a positive team environment
don’t underestimate errors.
Quick learning, as well as collaboration and social skills

What are the skills that QA must possess to answer most QA interview questions?

Programming languages, software development tools, software testing tools, and troubleshooting expertise are required.

Leadership, organisational and planning skills, communication, statistical analysis, problem-solving abilities, and industry-specific technical expertise are all essential for QA.

What are QA Duties?

A quality assurance engineer

Identify and correct flaws in the manufacturing process.
ensures criterias are met, recommend, implement, and monitor preventive and corrective actions.
Compile and evaluate statistical information.
During the testing process, ensure that user expectations are satisfied.
Creates tests to identify software bugs before to product launch.

Suggested Reading

Interview tips when appearing for QA roles

An Interviewer’s Complete Guide to hire the best QA Engineers

Top 40 Software Testing Interview Questions

QnA with Ajay Balamurugadas

Testsigma Blog

Farah Noor Khan